7 tricks to get the most out of your SSD disk.

Installing a SSD disk is one of the easiest ways to give a new life to your device. Its installation is very simple, since once we have moved our operative system to this unit; we can get a spectacular speed rate at boot time. However, there are many other ways to take advantage of this and make your installation even more worth it.


Using Windows 7 or higher

These days, it is difficult to find computers with Windows XP beyond a couple of offices. If this is your case, we recommend taking advantage to upgrade to Windows 7 or 8. Why? Very simple: these versions have support for SSD hard drives. This means that they recognize the drives, and Windows 7 & 8 is capable to get the maximum performance in terms of speed. Its installation is very simple, here’s how: if you need to buy a license, here you can find one of Windows 8 for your computer desktop or laptop.

Windows 8

Choose well which applications to install.


Once we have installed our operative system (OS) on the SSD, we need to see which applications we’ll install. We need to keep in mind that space is limited, so it is wise to choose well which ones are worth putting there or leaving in the conventional hard drive.

What we recommend are the heavier applications and that are always writing or eliminating information. In other words: Google Chrome, Adobe Photoshop, video editors, etc… games are also a good candidate but not priority. As for office suites, it will not notice a big difference.

Always leave some free space.

This advice actually applies to all hard drives, but in the case of SSD is something we should take more if consideration. It is important to leave some free space in case the applications need to use it for specific tasks; a small detail that your computer will thank you.

Don’t worry about fragmenting occasionally.

One of the most common tasks when it comes to maintaining a hard disk drive is defragmenting from time to time to order the free space and to make it write faster. In a SSD is this is not necessary, since its function is different and fills up space in the most organized way possible. One less task we have to do.

Don’t forget, TRIM is your friend.


The acronym TRIM might not sound familiar but it is one of the first things you should do when you install a SSD on a Windows computer. To do this you will have to go to the start menu and run the command prompt (cmd.exe). Then write the following and hit enter:

fsutil behavior query DisableDeleteNotify

If TRIM is working properly, then it should appear a zero. If it shows a one, we will write the following and hit enter:

fsutil behavior query|set DisableDeleteNotify = 0

What are we getting by doing that? Improve the performance of your SSD and have it always ready. This command helps automatically remove blocks of information that are no longer in use, thus it does not store useless information. It is simply, but very useful.

Enable write catching

Another thing we must if we have a SSD installed is enable write catching on Windows. For that, we need to go to device manager in the control panel. Then, we right click on properties and select enable write catching on the disk option.

It usually comes checked by default, but it is convenient to check before install to ensure that it is. This will also improve overall performance.

SSD Tweaker is perfect to have the disk up to date


Our last piece of advice is to use the SSD Tweaker application to control different aspects of you SSD disk. It is free and you can download it with this link. It is used to control large cache systems, manage hibernation mode, optimize TRIM, system restore and more…

It is a very useful application for advanced use which can we can benefit greatly if we are patient. You don’t know which SSD disk to buy? We leave you with a couple of recommendations.

Leave a Comment

Your email address will not be published. Required fields are marked *